Hazard Alert: Combustible Dust

Hazard Alert: Combustible Dust Explosions:

Combustible dusts are fine particles that present an explosion hazard when suspended in air in certain conditions. A dust explosion can be catastrophic and cause employee deaths, injuries, and destruction of entire buildings. In many combustible dust incidents, employers and employees were unaware that a hazard even existed. It is important to determine if your company has this hazard, and if you do, you must take action now to prevent tragic consequences.

How Dust Explosions Occur:

In addition to the familiar fire triangle of oxygen, heat, and fuel (the dust), dispersion of dust particles in sufficient quantity and concentration can cause rapid combustion known as a deflagration. If the event is confined by an enclosure such as a building, room, vessel, or process equipment, the resulting pressure rise may cause an explosion. These five factors (oxygen, heat, fuel, dispersion, and confinement) are known as the “Dust Explosion Pentagon”. If one element of the pentagon is missing, an explosion cannot occur.

Catastrophic Secondary Explosions:

An initial (primary) explosion in processing equipment or in an area where fugitive dust has accumulated may dislodge more accumulated dust into the air, or damage a containment system (such as a duct, vessel, or collector). As a result, if ignited, the additional dust dispersed into the air may cause one or more secondary explosions. These can be far more destructive than a primary explosion due to the increased quantity and concentration of dispersed combustible dust. Many deaths in past incidents, as well as other damage, have been caused by secondary explosions.

Industries at Risk Combustible dust explosion hazards exist in a variety of industries, including: agriculture, chemicals, food (e.g., candy, sugar, spice, starch, flour, feed), grain, fertilizer, tobacco, plastics, wood, forest, paper, pulp, rubber, furniture, textiles, pesticides, pharmaceuticals, tire and rubber manufacturing, dyes, coal, metal processing (e.g., aluminum, chromium, iron, magnesium, and zinc), recycling operations, fossil fuel power generation (coal), and 3D welding (a form of 3D printing).

Prevention of Dust Explosions:

To identify factors that may contribute to a explosion, Conduct a thorough hazard assessment of:

• All materials handled;

• All operations conducted, including by-products;

• All spaces (including hidden ones); and

• All potential ignition sources.

Dust Control Recommendations:

• Implement a hazardous dust inspection, testing, housekeeping, and control program; • Use proper dust collection systems and filters;

• Minimize the escape of dust from process equipment or ventilation systems;

• Use surfaces that minimize dust accumulation and facilitate cleaning; • Provide access to all hidden areas to permit inspection;

• Inspect for dust residues in open and hidden areas at regular intervals;

• If ignition sources are present, use cleaning methods that do not generate dust clouds;

• Use only vacuum cleaners approved for dust collection; and • Locate relief valves away from dust deposits

Ignition Control Recommendations:

• Use appropriate electrical equipment and wiring methods;

• Control static electricity, including bonding of equipment to ground;

• Control smoking, open flames, and sparks;

• Control mechanical sparks and friction;

• Use separator devices to remove foreign materials capable of igniting combustibles from process materials;

• Separate heated surfaces from dusts;

• Separate heating systems from dusts;

• Select and use industrial trucks properly;

• Use cartridge-activated tools properly; and

• Use an equipment preventive maintenance program.

Injury and Damage Control Methods:

• Separation of the hazard (isolate with distance);

• Segregation of the hazard (isolate with a barrier);

• Deflagration isolation/venting;

• Pressure relief venting for equipment;

• Direct vents away from work areas;

• Specialized fire suppression systems;

• Explosion protection systems; This is one in a series of informational Spark/ember detection for suppression activation;

• Develop an emergency action plan; and

• Maintain emergency exit routes.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s